Horizontal Panel - 12" X 60",72",84" (6" Wide Stripes NFPA)
Pre Made Reflective Chevron Panels. Available in a 12 inch x 5 foot, 6 foot and 7 foot lengths. (for custom sizes email me at firstname.lastname@example.org). Color choices are
- Red and Fluorescent Lime Yellow (most popular and NFPA compliant)
- Orange and Fluorescent Lime Yellow
(For Red on White or Orange on White Chevron Panels call 850-934-3157)
You can make your size and color choice using the drop down menus above.
The alternating stripes are 6" wide when measured diagonally. Both colors are reflective. The panels are self adhesive and have a peel off backing.
Our custom panels are created using Orafol/Reflexite V98 Conformable Prismatic film overlaid with Oracal colored film to create the alternating colors. They are very bright in the daytime and at night.
Our Pre-Striped Reflective Chevron Panels are easy to install. One person can install the panel but having two people makes the job easier. The panels are easy to install using either a hinge method or soapy water application method.
To use the hinge method you would simply position the panel on the vehicle with the backing still on and hinge one end using wide masking tape. The taped area becomes the hinge. You would begin peeling the backing off the panel starting at the hinge. As you peel you would press the panel onto the vehicle. I used a soft cloth to press the panel on. The hinge assures that the panel goes on straight.
The picture below shows the sizes that we have available on this page.
The second method is to mix a spray bottle with 1/4 teaspoon of soap (dawn or joy) and water. Peel the backing off the panel and spray the sticky side and then spray the vehicle as well. Now slide the panel into place and squeegee out the water. You can use a window washing squeegee. The soft rubber will not scratch the material like plastic ones will.
The "red and fluorescent lime yellow" panels satisfy the NFPA 1901 requirements for Chevron Stripes on Emergency Vehicles. The panels on this page are intended to go on the back of trucks, SUVs or Vans. If necessary they can be trimmed or cut into narrower strips for applications on other areas. As stated before the panels are made from prismatic reflective materials. Prismatic films are the brightest of all the reflective materials and far exceed NFPA standards. For vehicles other than fire trucks and fire apparatus, the other color combinations can be used.
The bottom picture is our 12" x 6 foot panel in an orange and fluorescent lime. The bottom image also shows our orange on white panels. The panels are very easy to trim with scissors or an exacto and can be modified to go around obstructions. We currently carry the following sizes and two color combinations. Red on Lime, Orange on Lime and by special request we carry red on white and orange on white. You can make your color choice using the drop down menus above.
12" x 60" (5 foot long) panels - $120
12" x 72" (6 foot long) panels - $140
12" x 84" (7 foot long) panels - $160